---
title: "Muji Pen — Kevin Wang"
description: "A Muji gel pen rebuilt in SolidWorks from my own measurements, one part at a time."
url: https://kevinw.ng/design/muji-pen
---
# Muji Pen

**3D CAD** · SolidWorks · Segal Design Certificate

I rebuilt a Muji gel pen in SolidWorks from my own measurements, one part at a time.

## Assembly or part

The pen comes apart into separate pieces, so it had to be an assembly. I measured each piece and where they meet, then drew a layout sketch splitting the pen into four parts: the chassis, the ink, the top cap and the bottom cap. That sketch became the blueprint and placed every part in position before any mates.

## The chassis

I started from the main cylinder, since the concave section can't be modeled without it. The black inner tube that sits inside the clear shell was the hard part: I lofted it as surfaces, then thickened them into the opaque inside and the transparent outside. I reused the loft as guide curves to cut the lip that stops the ink tube from falling through.

## The ink

One revolve could have made most of it, but every piece needed its own color, so I built it up from stacked extrudes kept as separate bodies. The metal tip is a revolve.

## The twisting cap

The hardest part to plan. It has a lot of circular symmetry, but the order of operations decides whether the model holds up. After talking it through with my TA, I built it inside out: the inner tube and its teeth first, then the ridges and connecting tubes, and the outer shell last.

## The threads

SolidWorks' thread presets were far too big for a part this small, so I made custom ones: a helix with a pitch matched to the real threads, then cut the thread profile along it.

## What I learned

I got to practice layout assemblies, solid modeling to build up parts, surface modeling for difficult geometry, and careful planning for a small, intricate part. If I did it again, I'd plan every part as carefully as the cap. SolidWorks is unforgiving, and planning saves a lot of time.

---

Kevin Wang · https://kevinw.ng · [More pages](https://kevinw.ng/llms.txt)
